ModelWAX610DWAX650S
Product name 802.11ax (WiFi 6)
Dual-Radio Unified
Pro Access Point
802.11ax (WiFi 6)
Dual-Radio Unified
Pro Access Point
Wireless
Standard IEEE 802.11 ax/ac/n/g/b/a IEEE802.11 ax/ac/n/g/b/a
MIMO MU-MIMO MU-MIMO
Wireless speed 2.4 GHz 575 Mbps 1150 Mbps
5 GHz 2400 GHz 2400 GHz
Bandwidth 20-,40-,80- and 160-MHz 20-,40-,80- and 160-MHz
Conducted typical trnasmit output power US
(2.4 GHz/5 GHz)
23/28 dBm 28/28 dBm
EU
(2.4 GHz/5 GHz)
19/25 dBm 19/26 dBm
RF Design
Antenna type 4x4 + 2x2 dual-optimized antenna 4x4 Smart Antenna
Antenna gain 2.4 GHz Peak gain 5 dBi Peak Gain 3 dBi
5 GHz Peak gain 6 dBi Peak Gain 5.8 dBi
Minimum receive sensitivity Min. Rx sensitivity up to -101 dBm -105 dBm
WLAN Feature
Band steering Yes Yes
WDS/Mesh Yes (V6.10) Future support
Fast roaming Pre-authentication, PMK caching and 802.11r/k/v Pre-authentication, PMK caching and 802.11k/v/r
DCS Yes Yes
Load balancing Yes Yes
Security
Encryption WEP/WPA/WPA2-PSK/WPA3 -
Authentication WPA/WPA2/WPA3-Enterprise/EAP/IEEE 802.1X/RADIUS authentication -
Access management L2-isolation/MAC filtering/Rogue AP detection L2-isolation, MAC filter, Rogue AP detection
Wireless Security - WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
Networking
IPv6 Yes Yes
VLANs Yes Yes
WMM Yes Yes
U-APSD Yes Yes
DiffServ marking Yes Yes
Management
Operating mode Nebula Cloud managed/controller-managed/standalone Nebula Cloud managed/controller-managed/standalone
ZON Utility
  • Discovery of Zyxel switches, APs and gateways
  • Centralized and batch configurations
    • IP configuration
    • IP renew
    • Device reboot
    • Device locating
    • Web GUI access
    • Firmware upgrade
    • Password configuration
  • Discovery of Zyxel switches, APs and gateways
  • Centralized and batch configurations
    • IP configuration
    • IP renew
    • Device reboot
    • Device locating
    • Web GUI access
    • Firmware upgrade
    • Password configuration
    • One-click quick association with Zyxel AP Configurator (ZAC)
  • ZYXEL Wireless Optimizer
  • WiFi AP planning
  • WiFi coverage detection
  • Wireless health management
  • WiFi AP planning
  • WiFi coverage detection
  • Wireless health management
  • ZAC -
  • Batch AP configuration
  • Batch AP firmware upgrade
  • Batch AP profile backup
  • Web UI/CLI Yes Yes
    SNMP Yes Yes
    Physical Specifications
    Item Dimesions
    (WxDxH)(mm/in.)
    180 x 180 x 39/7.09 x 7.09 x 1.54 230 x 235 x 53.5/9.06 x 9.25 x 2.11
    Weight (g/lb.) 545/1.20 1160/2.56
    Packing Dimesions
    (WxDxH)(mm/in.)
    229 x 216 x 64/9.02 x 8.50 x 2.52 282 x 266 x 79/11.1 x 10.47 x 3.11
    Weight (g/lb.) 780/1.72 1490/3.38
    Included accessories
  • Mount plate
  • Mounting screws
  • Mount plate
  • Mounting screws
  • MTBF(hr) 329,004 180,653
    Physical Interfaces
    Ethernet port 1 x 10/100/1000/2500M LAN
    1 x 10/100/1000M LAN
    1 x 1/2.5/5 Gbps Ethernet (PoE port)
    1 x 1 Gbps Ethernet
    Power/td>
  • PoE (802.3)at: power draw 19 W
  • DC input: 12 VDC 2 A
  • 802.3bt PoE (Maximum power draw: 31 W)
  • 12 V DC input
  • Environment Specifications
    Operating Temperature 0°C to 50°C/32°F to 122°F 0°C to 50°C/32°F to 122°F
    Humidity 10% to 95% (non-condensing) 10% to 95% (non-condensing)
    Storage Temperature -30°C to 70°C/-22°F to 158°F -30°C to 70°C/-22°F to 158°F
    Humidity 10% to 90% (non-condensing) 10% to 90% (non-condensing)
    Certifications
    Radio FCC Part 15C, FCC Part 15E, ETSI EN 300 328, EN 301 893, LP0002 FCC Part 15C, FCC Part 15E, ETSI EN 300 328, EN 301 893, LP0002
    EMC FCC Part 15B, EN 301 489-1, EN 301 489-17, EN55022, EN55024, EN61000-3-2/-3, EN60601-1-2, BSMI CNS13438 FCC Part 15B, EN 301 489-1, EN 301 489-17, EN55022, EN55024, EN61000-3-2/-3, EN60601-1-2, BSMI CNS13438
    Safety Safety EN 60950-1, IEC 60950-1, BSMI CNS14336-1 Safety EN 60950-1, IEC 60950-1, BSMI CNS14336-1
    Back to Top