ModelWAC500H
Product name 802.11ac Wave 2 Wall-Plate Unified Access Point
Wireless
Standard IEEE802.11 ac/n/g/b/a
MIMO MU-MIMO
Wireless speed 2.4 GHz 300 Mbps
5 GHz 866 GHz
Frequency band 2.4 GHz • USA (FCC): 2.412 to 2.462 GHz
• Europe (ETSI): 2.412 to 2.472 GHz
5 GHz • USA (FCC): 5.15 to 5.25 GHz; 5.725 to 5.850 GHz
• European (ETSI): 5.15 to 5.35 GHz; 5.470 to 5.725 GHz
Bandwidth 20-, 40- and 80-MHz
Conducted typical trnasmit output power US
(2.4 GHz/5 GHz)		 23/26 dBm
EU
(2.4 GHz/5 GHz)		 19/26 dBm
RF Design
Antenna type 2x2 MIMO Embedded Antenna
Antenna gain 2.4 GHz 3dBi
5 GHz 4dBi
Minimum receive sensitivity up to -99 dBm
WLAN Feature
Band steering Yes
WDS/Mesh Yes
Fast roaming Pre-authentication, PMK caching and 802.11r/k/v
DCS Yes
Load balancing Yes
Security
Encryption WEP/ WPA/WPA2-PSK/WPA3
Authentication WPA/WPA2-Enterprise/ EAP/ IEEE 802.1X/ RADIUS authentication
Access management L2-isolation/ MAC filtering
Networking
IPv6 Yes
VLANs Yes
WMM Yes
U-APSD Yes
DiffServ marking Yes
Management
Operating mode Nebula Cloud managed/controller-managed / standalone
ZON Utility
  • Discovery of Zyxel switches, APs and gateways
  • Centralized and batch configurations
    • IP configuration
    • IP renew
    • Device reboot
    • Device locating
    • Web GUI access
    • Firmware upgrade
    • Password configuration
    		•
    ZYXEL Wireless Optimizer
  • WiFi AP planning
  • WiFi coverage detection
  • Wireless health management
    		•
    Web UI/CLI Yes
    SNMP Yes
    Physical Specifications
    Item Dimesions
    (WxDxH)(mm/in.)    		 173 x 97 x 29 / 6.81 x 3.82 x 1.14
    Weight (g/lb.) 223 / 0.49
    Packing Dimesions
    (WxDxH)(mm/in.)    		 195 x 120 x 53 / 7.68 x 4.72 x 2.09
    Weight (g/lb.) 444 / 0.98
    Included accessories Multi-purpose mounting bracket with screws
    MTBF(hr) 542,017
    Physical Interfaces
    Ethernet port 1x 10/100/1000M uplink, 2x 10/100/1000M downlink(including one PoE PSE)
    Power
  • Input: AC 100 - 240V - 50/60 Hz 0.3A; Output: DC +12V 1A (PoE PSE disabled)
  • PoE 802.3at: power draw 18 W (include 7W for PoE PSE)
  • PoE 802.3af: power draw 11 W (PoE PSE disabled)
    		•
    Environment Specifications
    Operating Temperature 0°C to 50°C/32°F to 122°F
    Humidity 10% to 90% (non-condensing)
    Storage Temperature -30°C to 70°C/-22°F to 158°F
    Humidity 10% to 90% (non-condensing)
    Certifications
    Radio FCC Part 15C, FCC Part 15E; ETSI EN 300 328, EN 301 893; LP0002, EN60601-1-2
    EMC FCC Part 15B, EN 301 489-1; EN 301 489-17, EN55022, EN55024, EN61000-3-2/-3, BSMI CNS13438
    Safety EN 60950-1, IEC 60950-1; BSMI CNS14336-1
    Back to Top